
Study HIGH Quality MTCNA Free Study Guides and Exams Tutorials
Download MikroTik MTCNA Exam Dumps to Pass Exam Easily
MikroTik Certified Network Associate (MTCNA) Exam Certified Professional salary
The estimated average salary of MikroTik Certified Network Associate (MTCNA) Exam Certified Professional is listed below:
- India: 5,474,000 INR
- United States: 74,000 USD
- Europe: 62,000 EURO
- United Kingdom: 55,000 POUND
NEW QUESTION # 120
Which of the following are TCP/IP protocols used at the Application layer of the OSI model?
IP
TCP
Telnet
FTP
TFTP
- A. 1, 3 and 5
- B. 3, 4 and 5
- C. 1 and 3
- D. All of the above
Answer: B
NEW QUESTION # 121
Which firewall chain you should use to filter SSH access to the router itself?
- A. output
- B. forward
- C. input
- D. prerouting
Answer: C
NEW QUESTION # 122
You have 10 users plugged into a hub running 10Mbps half-duplex. There is a server connected to the switch running 10Mbps half-duplex as well. How much bandwidth does each host have to the server?
- A. 100 kbps
- B. 10 Mbps
- C. 1 Mbps
- D. 2 Mbps
Answer: B
NEW QUESTION # 123
Select all tunnels that support authentication of clients with a username and password.
- A. PPTP/L2TP
- B. PPPoE
- C. EoIP
- D. OpenVPN
- E. IPIP
Answer: B
NEW QUESTION # 124
The network address is
- A. The first address of the subnet
- B. The last address of the subnet
- C. The first usable address of the subnet
Answer: A
NEW QUESTION # 125
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
- A. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
- B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
- C. kind=pcq pcq-rate=256000 pcq-classifier=src-address
- D. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
- E. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
Answer: C,E
NEW QUESTION # 126
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?
- A. Internet
- B. Network Access
- C. Host-to-Host
- D. Application
Answer: C
NEW QUESTION # 127
In MikroTik RouterOS, Layer3 communication between 2 hosts can be achieved by using an address subnet of:
- A. /30
- B. /29
- C. /31
- D. /32
Answer: A,B,D
NEW QUESTION # 128
Action=redirect allows you to make
- A. Transparent DNS Cache
- B. Forward DNS to another device IP address
- C. Enable Local Service
- D. Transparent HTTP Proxy
Answer: A,D
NEW QUESTION # 129
Which of the following services use UDP?
DHCP
SMTP
SNMP
FTP
HTTP
TFTP
- A. 1, 3 and 6
- B. 2 and 4
- C. All of the above
- D. 1, 2 and 4
Answer: A
NEW QUESTION # 130
Select valid MACaddress
- A. G2:60:CF:21:99:H0
- B. 00:00:5E:80:EE:B0
- C. 192.168.0.0/16
- D. AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201
Answer: B
NEW QUESTION # 131
PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE server.
- A. False
- B. True
Answer: A
NEW QUESTION # 132
What does the firewall action "Redirect" do? Select all true statements.
- A. Redirects a packet to a specified port on a host in the network
- B. Redirects a packet to the router
- C. Redirects a packet to a specified IP
- D. Redirects a packet to a specified port on the router
Answer: A,C
NEW QUESTION # 133
Which WLAN IEEE specification allows up to 54Mbps at 2.4GHz?
- A. N
- B. G
- C. A
- D. B
Answer: B
NEW QUESTION # 134
If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?
- A. established
- B. no connection state would be applied to such packet
- C. invalid
- D. unknown
- E. new
Answer: E
NEW QUESTION # 135
Which of the following commands will allow you to set your Telnet password on a Cisco router?
- A. line telnet 0 4
- B. line vty 0 4
- C. line aux 0 4
- D. line con 0
Answer: B
NEW QUESTION # 136
Netinstall can be used to
- A. Install package for different hardware architecture
- B. Install different software version (upgrade or downgrade)
- C. Reinstall software without losing licence
- D. Keep configuration, but reset a lost admin password
Answer: B,C,D
NEW QUESTION # 137
In RouterOS queue configurations the word "total" ussually represents
- A. upload + download
- B. download - upload
- C. download
- D. upload
Answer: A
NEW QUESTION # 138
You need to reboot a RouterBoard after importing a previously exported rsc file to activate the new configuration.
- A. False
- B. True
Answer: A
NEW QUESTION # 139
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Write a script in '/system script' to set the clock
- B. Configure '/system ntp client' and set a valid and reachable NTP server address.
- C. Open the router and ensure the CMOS battery is fine.
- D. Configure '/system ntp server' and set a valid and reachable NTP client address.
Answer: B
NEW QUESTION # 140
......
Get 100% Real Free MTCNA - MikroTik Training MTCNA Sample Questions: https://evedumps.testkingpass.com/MTCNA-testking-dumps.html