Real MB-320 dumps - Real Microsoft dumps PDF in here [Dec-2023]
Realistic TestkingPass MB-320 Dumps PDF - 100% Passing Guarantee
NEW QUESTION # 20
You need to meet the needs for the large teakwood furniture order.
What must you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 21
A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.
Several components used in the production of the pain-relieving lotion and oils have special government-mandated reporting requirements.
You need to ensure the company can provide the appropriate reporting and tracking for these components.
Which parameters should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 22
You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.
Chemical product, C00D1 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 23
A manufacturing company is implementing production in Dynamics 365 Supply Chain Management.
The production scheduler requires that machines not be scheduled to run concurrently when planning production. The scheduler also must be able to see the scheduling m a graphical view.
You need to configure the system to meet the requirements.
Which three options should you configure? Each answer presents a partial solution.
NOTE: Each correct selection is worth one point
- A. operations scheduling
- B. Capable to Promise
- C. finite capacity
- D. bottleneck resource
- E. job scheduling
Answer: C,D,E
NEW QUESTION # 24
A company makes lubricants and greases that are used in the automotive industry.
The items use the standard cost method. Electricity and heating of the manufacturing building are allocated into the cost of goods based on the size and wattage of the machine used.
You need to ensure that the system is set up to support the cost allocation.
How should you complete the costing sheet configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
NEW QUESTION # 25
A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contract. The contract also contains the visual templates required for the customer to use in a season.
Vendor rebate agreements must only be applied if the following requirements are met:
* Units of measure for deliverables are the same unit of measure as on the agreement.
* The agreement is valid as of the date a purchase order is generated.
You need to configure the vendor rebate agreements.
What should you do?
- A. Set the Calculation date type field value to Created
- B. Set the Cumulative purchase by field value to the end of the season date
- C. Set the Cumulative purchase by field value to the beginning of the season date
- D. Set the Calculation date type field value to Requested delivery
Answer: A
Explanation:
Section: Create, process, and manage production batch orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/vendor-rebates
NEW QUESTION # 26
You are responsible for training the operations staff on production transactions in Dynamics 365 for Finance and Operations. The company uses backflushing for material consumption principles.
You need to train the operators on how to report unintended scrap.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Report additional time in route card journal
- B. Post additional materials in a picking list journal
- C. Report an additional good quantity at Report as finished
- D. Report an error quantity at Report as finished
Answer: B,D
Explanation:
Section: Create and manage production and lean orders
NEW QUESTION # 27
You need to resolve the issue for UserF.
What should you configure? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NOTE: Each correct selection is worth one point.
NEW QUESTION # 28
A company is looking to use Dynamics 365 for Finance and Operations.
The company is in the process of redesigning and retooling an existing manufacturing plant to support a large long-running contract. They want to be able to forecast capacity to easily ramp up for additional products.
You need to set up the environment.
Which type of manufacturing should you implement?
- A. Job shop
- B. Lean
- C. Discrete
- D. Process
Answer: A
NEW QUESTION # 29
A manufacturer uses route operations and job scheduling.
You use a unique calendar for a conveyor line. The company observes a decrease in the number of hours a conveyor line resource is operational due to breakdowns. You must make a temporary change to the number of hours the resource is available.
You need to adjust the efficiency percentage for the conveyor line calendar.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 30
You are a functional consultant for Contoso Entertainment System USA (USMF).
You need to create a calendar for USMF that uses factory shifts of 06:00 to 14:00 from Monday to Friday.
To complete this task, sign in to Dynamics 365 portal. You must complete Task 1 before completing this task. Task 1 is the creation of the working time template.
Answer:
Explanation:
See explanation below.
Explanation
We need to configure a calendar to use the working time template we configured in the previous question.
* On the home page, select Resource lifecycle management
* Select Calendars.
* Select New.
* In the Calendar field, classify your calendar. This is the ID of the calendar, which is used as a reference when assigning calendars, such as to an operations resource or a resource group.
* In the Name field, name your calendar.
* In the Standard work day in hours
* Make sure the row is selected, then select from the Action Pane.
* Select Compose working times. Generate working hours for each day in the period where you want to be able to schedule work. As time goes by, you can generate working times for additional periods.
* In the From date field, enter a date. This is the first day that this calendar must be open.
* In the To date field, enter a date. This is the last day that this calendar is open.
* In the Working time template field, enter or select a value. The working time template defines the working hours for each day of the week.
* Select OK.
* Close the page.
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/create-working-time-templates
https://docs.microsoft.com/en-us/dynamics365/human-resources/hr-personnel-create-working-time-calendar
NEW QUESTION # 31
A company wants to account for the time to set up a machine to manufacture a new part.
You need to set up the costing calculations in the system.
Which three calculation group warnings can you set up? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. No consumption
- B. No route
- C. No BOM
- D. No cost price
- E. No resources
Answer: A,D,E
NEW QUESTION # 32
You need to configure each item for plastic manufacturing.
Which production types should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 33
You have a product that can be manufactured on two different production lines in the same warehouse. You create resources and then create individual input locations for the resources. You create two routes. Each route uses different resources.
Materials are staged for consumption in different locations based on the resources being utilized for production.
You need to set up the formula to consume the goods from the correct line-side location.
What should you do?
- A. Select a warehouse and consumption operation for each line.
- B. Select resource consumption and the operation for each line.
- C. Select the plan group and consumption operation for each line.
- D. Specify a site in the formula header.
Answer: B
Explanation:
Section: Create and manage production and lean orders
Explanation
NEW QUESTION # 34
A company implements Dynamics 365 Finance and Operations.
You need to ensure that cost roll-ups and sales price calculations are configured for the scenario. Which options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 35
You are the quality assurance manager of a pharmaceuticals company.
One of your customers has requested to only receive batches of item B0001 that have an acid concentration between 5.5% -10.5%.
You need to set up the customer specific batch attribute to track percent acid for B0001.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-attributes
NEW QUESTION # 36
A company implements Dynamics 365 Supply Chain Management.
Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:
* Locate a warehouse at the subcontractor building.
* Support picking and shipping activity tracking.
* Associate costs of transporting materials between the locations in the cost of the finished product.
You need to modify the production flow.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a new production flow version
- B. Modify the overflow work activity and assign it to subcontractor
- C. Create transfer activities and assign them to the subcontractor
- D. Create a resource and work cell resource group for the subcontractor
- E. Modify the overflow work operation and associate it with the subcontractor
Answer: B,C,D
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work- production
NEW QUESTION # 37
You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.
You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.
You need to set up this item as a full visibility catch weight item.
Which two steps must you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create an inter-class unit of measure conversion between boxes and carats.
- B. Assign a Tracking dimension group with batch number as the only active tracking dimension.
- C. Assign the item a Tracking dimension group with active serial number control.
- D. Assign it a Serial number group with
Answer: A,C
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/create-a-catch-weight-item-with-full-visibility
NEW QUESTION # 38
You are a functional consultant for Contoso Entertainment System USA (USMF).
You need to schedule the Material Requirements Planning (MRP) master plan to run nightly at 03:00 (UTC-8).
To complete this task, sign in to Dynamics 365 portal.
Answer:
Explanation:
See explanation below
Explanation:
You need to configure a batch job to run the master plan nightly.
Create the batch job
Go to Navigation pane > Modules > System administration > Inquiries > Batch jobs.
Click New.
In the Job description field, type a value.
In the Scheduled start date/time field, enter a date and time.
Click Save.
Create a recurrence
On the Action Pane, click Batch job.
Click Recurrence. Use these options to enter a range and pattern for the recurrence.
Click OK.
Reference:
https://docs.microsoft.com/en-us/dynamics365/fin-ops-core/dev-itpro/sysadmin/tasks/create-batch-job
NEW QUESTION # 39
A chemical manufacturing company uses Dynamics 365 for Finance and Operations. A batch of material has a quality issue and must be reworked.
You need to create the rework order the production.
Which three options must be set? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Specify the batch number of the batch order
- B. Pick the reworked inventory after estimation
- C. Reserve the reworked inventory after estimation
- D. Set the item as a Formula production type
- E. Set the batch order as a rework batch
Answer: C,D,E
Explanation:
Section: Create, process, and manage production batch orders
NEW QUESTION # 40
A company that uses Lean manufacturing concepts to produce paper plates has redesigned the layout of the warehouse and production floor.
The company's production flow activities no longer match the tasks of the workers. Employees use paper and manual communication to complete the tasks.
You need to update the production flows to match their current processes by deactivating the obsolete production flows and creating new ones.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Deactive production flow version
2 - Create a new production flow version
3 - Create and relate activities for a production flow vesrion
4 - Create Kanban rules
NEW QUESTION # 41
You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.
You must build a new configuration model and include constraints in the model.
You need to determine which constraint type to use for each scenario.
Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 42
A company produces pipe at certain fixed lengths.
The company must be able to schedule cutting machines. You set up the cutting machines as resources. All cutting resources can produce many of the products. There are some products that require cutting machines that can produce longer lengths of product. Only some of the machines can do this.
You need to configure the resources to account for these different products.
What should you do?
- A. Create a resource group for each length.
- B. Configure the Data/Hour option on the Capacity unit field on the resource.
- C. Create a resource for each length.
- D. Build capability related to length and assign to the appropriate resources.
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/tasks/define-resource-capabilities
NEW QUESTION # 43
You are the product manager at a paint manufacturing company. Paint base is produced in 100 gallon batches. The paint base can be packaged in 1 gallon, 5 gallon, and 10 gallon containers.
You want to use consolidated batch orders for the bulk paint base item. You need to set up the items and formulas to allow for consolidated batch orders.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create a new item for bulk paint base and items for the three container sizes.
2 - Set up bulk item conversion between the packed products and the bulk item.
3 - Create the formulas for the different container sizes and define the bulk ....
NEW QUESTION # 44
A company uses separate finished good item numbers for size variations of the same product.
The company wants to minimize the number of variously-sized items that are created.
You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create a product dimension group for size under the dimension and...
2 - Create sizes under the dimension and variant groups
3 - Create product master
4 - Add product dimensions to the product master
Reference:
https://gfeaxblog.wordpress.com/2017/09/28/o365-how-to-create-product-masters/
NEW QUESTION # 45
......
Verified MB-320 dumps Q&As Latest MB-320 Download: https://evedumps.testkingpass.com/MB-320-testking-dumps.html