Free JN0-363 Questions for Juniper JN0-363 Exam [Nov-2024]
Validate your JN0-363 Exam Preparation with JN0-363 Practice Test (Online & Offline)
Juniper JN0-363 exam covers a wide range of topics that are relevant to the service provider industry. These topics include routing protocols, MPLS, Layer 2 and Layer 3 VPNs, BGP, and multicast. Candidates who pass JN0-363 exam will have a deep understanding of these technologies and will be able to apply this knowledge in real-world situations.
Juniper JN0-363 certification exam is designed for professionals who want to validate their skills and knowledge in service provider routing and switching. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam is part of the Juniper Networks Certification Program and is intended for individuals who have a solid understanding of networking technologies, protocols, and architectures. The JN0-363 exam is a specialist-level exam that covers a range of topics related to service provider routing and switching.
NEW QUESTION # 123
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The update messages contain an unsupported option
- B. The neighbor does not support IPv6
- C. The TCP session is not establishing
- D. The peer's AS number is misconfigured
Answer: D
NEW QUESTION # 124
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
- A. The ge-0/0/0.0 interface will not be assigned to a level
- B. The ge-0/0/0.0 interface will act as an L1 interface only
- C. The ge-0/0/0.0 interface will act as an L1/L2 interface
- D. The ge-0/0/0.0 interface will act as an L2 interface only
Answer: C
NEW QUESTION # 125
What is the purpose of STP BPDUs?
- A. to determine the root bridge
- B. to determine the root-alternate port
- C. to exchange MAC addresses
- D. to determine the least cost path
Answer: D
NEW QUESTION # 126
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. R3 will perform a label swap operation on the transport MPLS label.
- B. Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their own unique label-switched path.
- C. R3 will perform a label pop operation on the transport MPLS label.
- D. Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label- switched path.
Answer: A,C
NEW QUESTION # 127
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
- A. IIH
- B. CSNP
- C. PSNP
- D. LSP
Answer: B,C
NEW QUESTION # 128
Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup routers?
- A. BFD
- B. ISSU
- C. graceful restart
- D. VRRP
Answer: D
NEW QUESTION # 129
How does a Junos device learn about MAC addresses when II is first connected to an Ethernet LAN?
- A. The device learns the destination MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.
- B. The device sends out a network multicast message asking for all devices and MAC addresses on the network and stores this Information in addition to the interface from which the response was received.
- C. The device learns the source MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.
- D. The device sends out a network broadcast message asking tor all devices and MAC addresses on the network and stores this information In addition lo the interface from which the response was received.
Answer: B
NEW QUESTION # 130
Click the Exhibit.
Your network consists of subnets shown in the exhibit. You are asked to create an aggregate route for Router 1.
What is the appropriate prefix for the aggregate route in this scenario?
- A. 172.42.32.0/22
- B. 172.42.32.0/19
- C. 172.42.32.0/21
- D. 172.42.32.0/20
Answer: B
NEW QUESTION # 131
Which two statements ate correct about the community BGP attribute on a Junos device? (Choose two.)
- A. If the community attribute is present, it should be passed unchanged in the BGP updates.
- B. If the community attribute is present, it is ignored and deleted in the BGP updates.
- C. The community attribute is a mandatory BGP attribute.
- D. The community attribute is an optional BGP attribute.
Answer: A,C
NEW QUESTION # 132
Exhibit
Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)
- A. You should configure the max period for NSR precision timers.
- B. You must configure graceful restart.
- C. You should configure commit synchronization.
- D. You must configure GRES.
Answer: C,D
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/high-availability/topics/task/nsr-configuring.html Nonstop routing (NSR) requires both Graceful Routing Engine Switchover (GRES) and commit synchronization to be configured to maintain routing protocol and forwarding state during a Routing Engine switchover. NSR allows the secondary Routing Engine to take over the control plane without the protocols needing to restart, and GRES ensuresthat the forwarding plane continues operating with the current forwarding table. Commit synchronization ensures that configuration changes are synchronized between the primary and backup Routing Engines.
References:
Juniper Networks documentation on High Availability: Configuring Nonstop Active Routing
NEW QUESTION # 133
Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D
Which two OSPF area types will support this configuration? (Choose two)
- A. stub area
- B. not-so-stubby area
- C. totally stubby area
- D. non-backbone area
Answer: B,D
NEW QUESTION # 134
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
- A. IS-IS
- B. BGP
- C. MPLS
- D. OSPF
Answer: A,D
NEW QUESTION # 135
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will swap the prefix from inet.0 to inet.3
- B. The command will install the prefix in inet.0 rather than inet.3
- C. The command will install the prefix in inet.3 rather than inet.0
- D. The command will swap the prefix from inet.3 to inet.0
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION # 136
Exhibit button
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. R3 will perform a label swap operation on the transport MPLS label.
- B. Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their own unique label-switched path.
- C. Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label-switched path.
- D. R3 will perform a label pop operation on the transport MPLS label.
Answer: A,D
NEW QUESTION # 137
The LSP is not establishing correctly.
Referring to the exhibit, what should you do to solve the problem?
- A. Enable traffic engineering for the IS-IS protocol.
- B. Enable traffic engineering for the BGP protocol.
- C. Enable traffic engineering for the RSVP protocol.
- D. Enable traffic engineering for the OSPF protocol.
Answer: C
NEW QUESTION # 138
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?
- A. The command is only available on the backup Routing Engine.
- B. The command is only available if non-stop routing is enabled.
- C. The command is only available If graceful restart is enabled.
- D. The command is only available If a backup router is configured.
Answer: A
NEW QUESTION # 139
Interface ge-0/0/0.0 connects your network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?
- A. Configure a static route for Interface ge-0/0/0.0.
- B. Create a generated route for Interface ge-0/0/0.0.
- C. Add ge-0/0/0.0 as a passive interface In OSPF.
- D. Remove interface ge-0/0/0.0 from OSPF.
Answer: C
NEW QUESTION # 140
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The last node in the path will not pop the MPLS label.
- B. The LSP is protected with link protection.
- C. The last node in the path will pop the MPLS label.
- D. The LSP is protected with fast reroute.
Answer: B,C
NEW QUESTION # 141
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B.Which routes will be advertised from Router B to Router E?
- A. BGP routes learned from Router D only
- B. BGP routes learned from Router A only
- C. BGP routes learned from Routers A, C, and D only
- D. BGP routes learned from Routers A and C only
Answer: C
NEW QUESTION # 142
Click the Exhibit button.
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 143
Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D
Which two OSPF area types will support this configuration? (Choose two)
- A. stub area
- B. not-so-stubby area
- C. totally stubby area
- D. non-backbone area
Answer: B,D
NEW QUESTION # 144
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?
- A. Level 1 is disabled and Level 2 is enabled.
- B. Level 1 is enabled and Level 2 is enabled.
- C. Level 1 is disabled and Level 2 is disabled.
- D. Level 1 is enabled and Level 2 is disabled.
Answer: C
NEW QUESTION # 145
......
Check Real Juniper JN0-363 Exam Question for Free (2024): https://evedumps.testkingpass.com/JN0-363-testking-dumps.html